Rev-a-shelf 4265-22-52 User Manual download pdf

INSTALLATION INSTRUCTIONS

INDEPENDENTLY ROTATING UPPER PANTRY SHELF SYSTEM

1. Using template, install bottom positioner in cabinet with four (4) ¾” x 8

oval head screws.

2. Using template, install upper pivot support with four (4) ½” x 8 truss

head screws.

3. Starting from the bottom of the lower shaft, slide upper shelf onto shaft.

Slide second positioner onto a shaft and temporaily tighten screw with

positioner approximattely 10 inches from bottom end of shaft. Slide

bottom shelf onto shaft.

4. Insert upper shaft assembly into lower shaft and install locking screw

into lower shaft.

5. Place unit into cabinet and engage lower and upper shafts into

mounting anges. Tighten upper mounting ange locking screw.

6. Lift upper shaft assembly to engage in upper pivot support. Tighten

locking screw.

7. Lift lower shelf and tighten shaft locking screw in bottom positioner

assembly.

8. Adjust upper shelf positioner by grasping and supporting second

positioner assembly while loosening locking screw. Rotate positioner

and shelf into alignment and securely tighten locking screw.

Note: Ensure positioner assembly locking screws are facing straight

out of cabinet to align at postion of lazy susan to cabinet opening.

INDEPENDENTLY ROTATING LOWER PANTRY SHELF SYSTEM

1. Using template install upper and lower mounting anges with four

(4) ¾” by 8 oval head screws. * Note: If mounting 6270 Series upper pantry

shelf system directly above 6260 series lower pantry shelf system.

• Using template provided, drill four (4) ⁄” diameter holes through

mounting panel. • Use four (4) 10-32 x 1” (not included) oval head

self-tapping screws to fasten upper mounting flange of lower pantry to

positioner assembly of upper pantry.

2. Install positioner assembly 3” up from bottom of lower shaft and tighten

locking screw.

3. Add lazy susan and positioner assembly for next shelf. Repeat for remaining

shelves.

4. Insert upper shaft assembly into lower shaft and install locking screw into

lower shaft.

5. Place unit into cabinet and engage lower ad upper shafts into mounting

flanges. Tighten upper mounting flange locking screw.

6. Tighten upper shaft assembly locking screw.

7. Tighten lower mounting flange locking screw.

8. Adjust shelves to desired location and tighten positioner assemblies locking

screws.

Note: Ensure positioner assembly locking screws are facing straight out of cabinet

to align at postion of lazy susan to cabinet opening.

I-2582-TRI

Upper Pivot Support

Upper Shaft Assem.

Locking Screw

Shaft

Shelf

Shelf Support

Bottom

Positioner Assembly

Shaft Locking Screw

Mounting Flange

Upper Shaft Assem.

Locking Screw

Shaft

Shelf

Shelf Support

Positioner Assembly

Mounting Flange

Jack Screw

1 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSINDEPENDENTLY ROTATING UPPER PANTRY SHELF SYSTEM1. Using template, install bottom positioner in cabinet with four (4) ¾” x 8o

Page 2 - I-2582-TRI

1. Use la plantilla para instalar el posicionador inferior en el armario con cuatro (4) tornillos de cabeza ovalada num. 8 x 3/4.1. En utilisant le

Comments to this Manuals

No comments

Rev-a-shelf 4265-22-52 User Manual

Browse online or download User Manual for For Home Rev-a-shelf 4265-22-52. Rev-A-Shelf 4265-22-52 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For Home Rev-a-shelf 4265-22-52